G5LA-1E 24DC

1 PCB Relay G5LA A Cubic, Single-pole 10A Power Relay „ Small size and light weight • 19.6 × 15.6 × 15.6 mm, 7.5g „ High Insulation • Dielectric strength 2,000V • Withstand impulse voltage 4,500V „ High heat resistance and tracking performance • UL class-F available (-CF model) • IEC60335 GWT compliant • Tracking resistance CTI>250 „ Environmental friendly (RoHS compliant) Ordering Information Contact form SPDT Switching capacity Standard High capacity (NC side) SPST-NO Model number Flux protection G5LA-1 G5LA-1-CF G5LA-1-E G5LA-1-E-CF G5LA-1A G5LA-1A-CF Fully sealed G5LA-14 G5LA-14-CF G5LA-14-E G5LA-14-E-CF G5LA-1A4 G5LA-1A4-CF Note : When ordering, add the rated coil voltage to the model number. Example: G5LA-1 12VDC Rated coil voltage „ Model Number Legend G5LA -☐☐☐-☐-☐ ☐VDC 1 2 3 4 5 6 1. Number of Poles 1: 1pole 2. Contact Form None: SPDT A: SPST-NO 3. Enclosure Ratings None: Flux protection 4: Fully sealed 4. Switching capacity None: Standard E: High capacity (NC side) 5. UL Insulation System None: Standard CF: Class F 6. Rated Coil Voltage 1 2 Specifications „ Coil Ratings Rated voltage 5 VDC 9 VDC 12 VDC 24 VDC 48 VDC 72 mA 40 mA 30 mA 15 mA 10 mA Rated current 69.4 Ω 225 Ω 400 Ω 1600 Ω 4800 Ω Coil resistance 75% max. of rated voltage Must operate voltage 10% min. of rated voltage Must release voltage Max voltage 130% of rated voltage at 85℃170% of rated voltage at 23℃ 360 mW 480 mW Power consumption (Approx.) Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. „ Contact Ratings Item Contact material Load Rated load NO Standard model AgSnO2 Resistive load (cosΦ=1) 10A at 250VAC 10A at 24VDC 5A/5A at 125VAC 5A/5A at 24VDC 10A(NO), 5A(NC) 250VAC, 24VDC 10A(NO), 5A(NC) AC2,500VA, DC240W NO/NC AC625VA, DC120W NO NO/NC Rated carry current Max. switching voltage Max. switching current Max. switching power Failure rate (reference value) Note: P level:λ60 = 0.1×10-6/operation High capacity (-E) model 5A/5A at 250VAC 5A/5A at 24VDC 10A 10A AC1,250VAC, DC120W 100mA at DC5V „ Characteristics 100 mΩ max. 10 ms max. 5 ms max. Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance 1,000 MΩ min. (at 500 VDC) 2,000 VAC. 1mA 50/60Hz for 1 min between coil and contacts Dielectric strength 750 VAC 1mA 50/60Hz for 1 min between contacts of same polarity Destruction: 10 to 55 Hz, 1.5-mm double amplitude Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Destruction: 1,000 m/s2 (approx.100G) Shock resistance Malfunction: 100 m/s2 when energized ; 100 m/s2 when no energized Mechanical: 10,000,000 operations min. Endurance Electrical: 100,000 operations typical Ambient temperature Operating: -40℃ to 85℃ (with no icing) Storage: -40℃ to 85℃ (with no icing) Operating: 35% to 85% Ambient humidity Storage: 35% to 85% Approx. 7.5g Weight Note: Values in the above table are the initial values. Contact resistance Operation time Release time Max. operating frequency 2 3 „ Approved standards UL508 (UL File No. E41643) Model Coil rating Contact rating G5LA 5 to 48 VDC NO: 10A, 277Vac, general use, 100,000 cycles 10A, 277Vac, general use, 85ºC, 50,000 cycles (-CF model) 15A, 125Vac, general use, 50,000 cycles 1/2Hp, 125Vac 1/2Hp, 250Vac 200W tungsten, 125Vac, 100,000 cycles NC: 10A, 125Vac, resistive 10A, 277Vac, general use, 100,000 cycles (-E model) EN61810-1 (VDE Reg. No. B652) Model Coil rating G5LA 5,6,9,12,18,24,48 VDC Contact rating NO: 10A, 250Vac, cosφ=1, 85ºC, 1 sec on/1 sec off - flux protection: 50,000 cycles - fully sealed: 10,000 cycles 10A, 250Vac, cosφ=1, 85ºC, 5 sec on/5 sec off, 25,000 cycles 12A, 125Vac, cosφ=1, 85ºC, 10,000 cycles NC: 10A, 250Vac, cosφ=1, 85ºC, 25,000 cycles (-1-E model) NO/NC: 5A, 250Vac, cosφ=1, 85ºC - flux protection: 50,000 cycles - fully sealed: 10,000 cycles GB15092.1 (CQC File No. CQC06001015477) Model Coil rating G5LA 5,9,12,24,48 VDC Contact rating NO: 10A, 250Vac, resistive, 10,000 cycles 12A, 120Vac, resistive, 10,000 cycles NO/NC: 10A, 250Vac, resistive, 10,000 cycles (-E model) 12A, 250Vac, resistive, 10,000 cycles (-E model) 3 4 Dimensions Note: All units are in millimeters unless otherwise indicated. „ SPDT Models Terminal Arrangement/Internal Connections (Bottom View) Mounting Holes (Bottom Views) Tolerance: ±0.1mm Unless specified SPDT SPDT *Average value „ SPST-NO Models Mounting Holes Terminal (Bottom Views) Arrangement/Internal Connections (Bottom View) Tolerance: ±0.1mm Unless specified SPST-NO SPST-NO *Average value 4 5 Engineering Data Max. Switching Power Endurance 250VAC, 24VDC resistive load Note: NO contact Note: NO contact, Typical value Ambient Temp. Vs Max. Voltage Note: The maximum coil voltage is the maximum value in a varying range of operating power voltages not a continuous voltage 5